FAQs Preguntas frecuentes acerca de nuestros productos y soluciones

Realizar consulta Realizar consulta

All FAQs (1867 total: showing 1481-1500)

Can a CR800/CR850 and CR1000/CR3000 be connected via a CS I/O port with a null modem cable?
What type of crossover cable is required to use Modbus over TCP/IP on a CR1000 or CR3000 with an NL120 or NL115?
How can a CR1000 or CR3000 interface with a Modbus/TCP device?
Can the CR800, CR850, CR1000 or CR3000 be used to log an RS-422 output directly, or is an extra unit needed?
Can Short Cut be used to make a CR1000 or CR3000 with an NL120 push data to an FTP?
Is there a way to allow a user to change constants in a CR800, CR1000, CR3000, or CR6 program without allowing the user to make other program changes?
If a CR1000 will not pass self-calibration, what can be done to fix that?
How many control ports are available on a CR1000?
How many RS-232 devices can the CR1000 handle?
How can a CR1000 be connected to a device that uses Modbus RTU over RS-485?
What are the RS-232 throughput capabilities of the CR1000 when connecting multiple serial devices?
Using a CR1000, is it possible to read the four different COM ports at different baud rates?
Can the RS-232 port on a CR1000 supply 12 Vdc power for a sensor?
What are the options for collecting data from a CR1000 over IP?
Is there an easy way to modify an existing checksum algorithm using CRBasic and a CR1000?
How many analog outputs does the CR1000 have?
How many tables can be defined for the CR1000?
Is it possible to save the datalogger binary data as a file and download it to LoggerNet before it is stored in a CSV file?
Is there a way for a CR1000 to measure a 12 Vdc voltage without an external circuit?
Can the TCP port for the CR1000 internal HTTP Web server be changed from 80 to something else?

Anterior Siguiente