FAQs Preguntas frecuentes acerca de nuestros productos y soluciones

Realizar consulta Realizar consulta

All FAQs (1867 total: showing 1621-1640)

Is it possible to use LoggerNet Admin software to connect to, and display data from, multiple dataloggers?
Can a datalogger be contained in a waterproof enclosure?
What does the PreserveVariables instruction do?
¿Pueden conectarse simultáneamente al datalogger más de un dispositivo SDM?
En los dataloggers Campbell Scientific, ¿pueden usarse sistemas de telemetría para descargar datos, chequear parámetros, etc.?
Can binary data be received via the serial terminal of a data logger?
What might cause a CRBasic datalogger to stop storing data?
How can the amount of time before the memory of a datalogger is filled be calculated?
What are the rules regarding when data is deleted from a datalogger?
What is a USR drive?
What needs to be done to get a CR3000 program to run on a CR9000 or CR9000X?
If a CR3000, CR1000, CR800, or CR850 has TLS enabled and connects to a server whose certificate is not verified by a “trusted” signer, what will the datalogger do?
If a CR3000, CR1000, or CR800-series datalogger has a “machine self-calibration failed” message, what does that mean?
Can CR3000, CR1000, CR800, or CR850 digital terminals be configured to act as RS-232 terminals?
Do the CR800-series, CR1000, and CR3000 dataloggers have 50 Hz versions?
What is the best way to download data simultaneously from a remote CR1000 and CR3000 via a cellular modem?
Can the collected data on a CR3000 or CR5000 be relayed to a display panel via a voltage or 4 to 20 mA signal?
Can communication be established between a computer and a CR3000, CR1000, CR800, or CR850 datalogger in a Wi-Fi network environment?
How can multiple CR3000, CR800-series, or CR1000 dataloggers be connected together?
Can an iPhone be used to load programs from a computer to a CR3000, CR1000, or CR800-series datalogger?

Anterior Siguiente