FAQs Preguntas frecuentes acerca de nuestros productos y soluciones

Realizar consulta Realizar consulta

All FAQs (1867 total: showing 301-320)

Are data from the OBS-3A comparable with data from the OBS-3+ or OBS300?
Using an OBS-3+ or OBS300, when would it be advantageous to use a 4X curve instead of a 1X curve?
Why are there two different turbidity measurements (Turbidity-High and Turbidity-Low), what do they signify, and how does the OBS-3+ or OBS300 differentiate between the measurements when it stores the data?
What is the accuracy and deviation from actual NTU in the low range for the OBS-3+ or OBS300?
What size is the arc that the OBS-3+ or OBS300 measures?
Is it possible to adjust an OBS-3+ or OBS300 for measurements up to 4,000 NTUs?
Is it possible to operate an OBS-3+ or OBS300 onboard a vessel while the vessel is in motion?
Can the OBS-3+ be installed on a pipe?
Can the signal from an OBS-3+ or OBS300 be read directly without the use of a datalogger?
What is the minimum water depth in which the OBS-3+ or OBS300 can be installed?
Can the OBS-3+ withstand dry weather conditions and work properly if it is not submerged in water all the time?
How is an OBS300 sensor secured?
Can the OBS300 withstand dry weather conditions and work properly if it is not submerged in water all the time?
What is the difference between the OBS-3+ and the OBS300?
How do the RF401A and RF411A compare with their predecessors?
Can a COM220 and an RF401A coexist on a CS I/O terminal?
How many CR206X dataloggers can one RF430 communicate with?
Can an RF401A be used as a base radio to communicate with RF400 devices, as well as with a PakBus network of CR206X dataloggers?
Is there an RF filter for an RF401A or RF450 that can be used to clean up local interference?
What is the maximum number of AVW206 devices that can be connected to one RF401A?

Anterior Siguiente